Retrofit Bluetooth module bracket - AZ82.70-P-0014-02EW

MODEL 212.0##/2## 1# with code 279 (Electronic gear selector) with code 386 (Comfort telephony) 

MODEL 218.3## (except 218.374) 1#, 218.9## (except 218.974) 1# with code 386 (Comfort telephony) 

1. Mark holes for Bluetooth module bracket on center console (7).
2. Drill Ø 4 mm holes.

   The drill depth must not exceed 8 mm. Otherwise the center console (7) or the front passenger seat may be damaged.

   Shown on model 212 

   Fig 1: Bluetooth Module Bracket On Center Console Holes - Shown On Model 212

   Courtesy of MERCEDES-BENZ USA
3. Screw Bluetooth module bracket (1) securely to center console using screws/bolts (6) included in bolt-on kit.

   Ensure that Bluetooth module bracket (1) is seated correctly.

4. Cover Bluetooth module wiring harness bracket (2) and opening in center console (broken line) with felt tape.

   Reposition Bluetooth module wiring harness bracket (2), if required. Ensure that felt tape is seated correctly.

5. Install bracket (14) and tighten with screw/bolt (15).
   Fig 2: Bluetooth Module Bracket And Bolt

   Courtesy of MERCEDES-BENZ USA