Retrofit iPod interface with video function - AZ82.60-P-0017EW

MODEL 212.0## (except 212.074/077) 1# up to 5/31/12, 212.2## (except 212.274/277) 1# up to 5/31/12 up to model year 2013 with CODE 512 (COMAND APS with DVD changer) without CODE 088 (Control code NTG 4.5) without CODE 218 (Reversing camera) without CODE 498 (Japanese version) without CODE 518 (Media Interface) 

MODEL 212.0## (except 212.074/077) 1# up to 5/31/12, 212.2## (except 212.274/277) 1# up to 5/31/12 up to model year 2013 with CODE 527 (COMAND APS with single DVD drive (with navigation)) without CODE 088 (Control code NTG 4.5) without CODE 218 (Reversing camera) without CODE 498 (Japanese version) without CODE 518 (Media Interface) 

Fig 1: Identifying Ipod Connection And Ipod Interface

Courtesy of MERCEDES-BENZ USA

	Remove
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
1	Remove COMAND controller unit
			AR82.60-P-7502EW
2	Remove glove box
			AR68.10-P-1200EW
	Install
3	Install iPod wiring harness and iPod interface (2)		AZ82.60-P-0001-02EWA
	Notes on avoiding damage to optical fibers during repair work		AH82.60-P-0001-05AK
		Hand drill (with chuck up to 16 mm dia.)
4	Install glove box
			AR68.10-P-1200EW
5	Install COMAND controller unit
			AR82.60-P-7502EW
6	Connect Star Diagnosis
7	Enable video AUX function in COMAND controller unit by means of variant coding with XENTRY
8	Disconnect STAR DIAGNOSIS
9	Connect iPod to iPod connection (1) and perform function check of system	Check functions in vehicle as per the iPod operating instructions.