Remove/install radio operating unit - AR82.60-P-7503CW
MODEL 204
MODEL 212.0 (except 212.074/077), 212.1, 212.2 (except 212.274/277) without CODE 279 (Electronic gear selector)
Shown on model 204.0
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Perform initial startup of Audio/COMAND control panel (A40/9) | When replacing the Audio/COMAND control panel (A40/9). | |
| AD00.00-P-2000-04A | |||
| 2 | Open armrest (3) and take out waste receptacle (4) | ||
| 3 | Remove screw/bolt (5) | ||
| 4 | First unclip front catch hooks (6), then side catch hooks (7) and remove cup holder cover (8) | ||
| 5 | Loosen the center console (1) until the electrical line (2) is accessible on the underside of the center console (1) | MODEL 204 | AR68.20-P-2000CW |
| 6 | Remove bolt (10) | ||
| 7.1 | Disconnect electrical connector (11) | MODEL 204.0/2/3 MODEL 204.9 up to model year 2013 MODEL 212.0 (except 212.074/077), 212.1, 212.2 (except 212.274/277) without CODE 279 (Electronic gear selector) |
|
| 7.2 | Disconnect electrical connection (12) | MODEL 204.9 as of model year 2013 |
|
| 8.1 | Unclip connector of electrical connection (12) from center console (1) | MODEL 204.9 as of model year 2013 |
|
| 8.2 | Unclip connector of electrical connection (11) from center console (1) | MODEL 204.0/2/3 MODEL 204.9 up to model year 2013 MODEL 212.0 (except 212.074/077), 212.1, 212.2 (except 212.274/277) without CODE 279 (Electronic gear selector) |
|
| 9 | Unhook electrical line (2) from guides (arrows) and remove Audio/COMAND control panel (A40/9) | ||
| 10 | Install in the reverse order |