Remove/install bass speaker amplifier - AR82.62-P-7719EW
MODEL 212.0/1 with CODE (810) Sound system
| Remove/install | |||
| 1 | Switch off ignition and remove transmitter key or KEYLESS-GO start/stop button from electronic ignition lock control unit | ||
| 2 | Remove rear shelf | AR68.30-P-4580EW | |
| 3 | Lift damping mat (1) until rear bass speaker amplifier (N40/9) is accessible and support insulating mat (1) with assembly wedges (2) n | Figure | |
| 4 | Remove bolts (3) | ||
| 5 | Lift rear bass speaker amplifier (N40/9) | ||
| 6 | Disconnect electrical connector (4) | ||
| 7 | Remove rear bass speaker amplifier (N40/9) | ||
| 8 | Install in the reverse order |