Remove/install keyless-Go antenna - AR82.62-P-8000CY

MODEL 204.9, 212.1/2 with CODE 889 (Keyless Go)

Rear door

Fig 1: Keyless Go Antenna Remove/Install Components

G09977644

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
1	Remove door lining on left or right rear door	Remove/install rear door lining	AR72.12-P-1010CW
2	Remove rear door module (1) at left and right rear door	Only on vehicles with speaker in rear door.
		Remove/install rear door module MODEL 204.9, 212.1/2 with CODE 889 (Keyless Go) MODEL 212.0 with CODE 889 (Keyless Go) without CODE Z04 (Light armoring) Creates access to remove rivet residues from rear door	AR72.12-P-0103CW
3	Disconnect electrical connector (2) from left rear door KEYLESS-GO antenna (A2/39) or right rear door KEYLESS-GO antenna (A2/41)
4	Drill out rivets (3) at left rear door KEYLESS-GO antenna (A2/39) or right rear door KEYLESS-GO antenna (A2/41)	Secure left rear door KEYLESS-GO antenna (A2/39) or right rear door KEYLESS-GO antenna (A2/41) at rear door module (1) with new rivets (3). Blind/self-piercing riveting. Rechargeable screwdriver, rechargeable drill.
5	Remove left rear door KEYLESS-GO antenna (A2/39) or right rear door KEYLESS-GO antenna (A2/41) from rear door module (1)
6	Completely remove rest of rivet and chips from left or right rear door	Completely remove rivet residues. Remaining rivet residue causes corrosion damage to the left or right rear door. Wet and dry vacuum cleaner
7	Install in the reverse order