Electrical function schematic for driving conditions of the hybrid drive system - PE08.30-P-2069-97DAI
ENGINE 276.952 in MODEL 212.095 as of model year 2014
ENGINE 651.924 in MODEL 212.098/298 as of model year 2014
| Code: | Designation: | Position: |
|---|---|---|
| 1 | Service brake, status | 2D |
| 10 | Discharge current for motor operation, energy flow | 20C |
| 11 | Charging current from alternator operation, energy flow | 18C |
| 12 | Charging current, energy flow | 17J |
| 13 | Charging voltage and charging current, signal | 8D |
| 14 | Electrical machine rotor position, signal | 18C |
| 15 | Charging voltage and charging current, request | 15D |
| 16 | High-voltage battery voltage, signal | 7H |
| 17 | High-voltage battery temperature, signal | 7H |
| 18 | Available torque, signal | 7D |
| 19 | Electric machine generative torque, signal | 7D |
| 2 | Accelerator pedal sensor, signal | 5H |
| 20 | Electric machine motor torque, signal | 8D |
| 21 | Wet clutch, status | 3H |
| 22 | Wet clutch, request | 3J |
| 23 | Discharge voltage and discharge current, request | 15D |
| 24 | Wheel speed, signal | 2D |
| 25 | Torque lowering/ESP dynamics, request | 2D |
| 26 | Torque change/DISTRONIC dynamics, request | 5D |
| 27 | Gear range, request | 3J |
| 28 | Gear range, status | 3H |
| 3 | Electric machine rpm, signal | 7D |
| 3 | Electric machine rpm, signal | 18C |
| 4 | Torque change/DISTRONIC dynamics, request | 18D |
| 5 | Electric machine, status | 7D |
| 6 | Tolerable discharge voltage/current, signal | 14D |
| 7 | Tolerable charging voltage/current, signal | 15D |
| 8 | Electric machine specified torque, request | 14D |
| 9 | Discharge current, energy flow | 17E |
| A100 | High-voltage battery module | 17J |
| A79/1 | Electric machine | 21C |
| A79/1b1 | Electric machine temperature sensor | 21E |
| B37 | Accelerator pedal sensor | 5K |
| CAN C | Drive train CAN | 3J |
| CAN E1 | Chassis CAN 1 | 3C |
| CAN E1 | Chassis CAN 1 | 6B |
| CAN L | Hybrid CAN | 6J |
| CAN L | Hybrid CAN | 12C |
| CAN L | Hybrid CAN | 12K |
| Code 23P | Driver assistance package | 11A |
| Flex E | Chassis FlexRay | 10B |
| L20 | Electric machine rotor position sensor | 21B |
| N129/1 | Power electronics control unit | 16C |
| N3/10 | ME-SFI [ME] control unit | 6E |
| N3/9 | CDI control unit | 3E |
| N30/6 | Regenerative braking system control unit | 3A |
| N62/1 | Radar sensors control unit | 13B |
| N82/2 | Battery management system control unit | 16K |
| N93/7 | Chassis gateway control unit | 8A |
| U74 | Valid for diesel engines | 2E |
| U75 | Valid for gasoline engines | 5E |
| Y3/8n4 | Fully integrated transmission control unit | 3K |