Press rubber mount with grooved ball bearing onto linkage arm - AR41.10-P-0100-05TX

MODEL 172, 204, 207, 212, 218, 219, 231 

Fig 1: Identifying Drift (126 589 03 15 00)

Courtesy of MERCEDES-BENZ USA

1. Press rubber mount with grooved ball bearing (7) using drift (05) onto joint fork of rear drive shaft.

   The open side of the grooved ball bearing (7) must face downwards.

   Fig 2: Pressing Rubber Mount With Grooved Ball Bearing

   Courtesy of MERCEDES-BENZ USA