Press grooved ball bearing out of rubber mount of propeller shaft, press in - AR41.10-P-0100-02TX

MODEL 172, 204, 207, 212, 218, 219, 231 

Fig 1: Identifying Removal And Installation Tool (116 589 09 43 00)

Courtesy of MERCEDES-BENZ USA

Press out 

1. Press out grooved ball bearing (8) from rubber mount (7b) using press out/in tool (04a, 04b).
   Fig 2: Pressing Out Grooved Ball Bearing From Rubber Mount

   Courtesy of MERCEDES-BENZ USA

Press in 

2. Press in grooved ball bearing (8) into rubberized bearing seat as far as the contact surface (arrows) using press out/in tool (04a, 04b).

   Ensure that the grooved ball bearing (8) is properly seated.

   Fig 3: Pressing Grooved Ball Bearing

   Courtesy of MERCEDES-BENZ USA