Align windshield in body opening - AR67.10-P-1000-04G

MODEL 117, 156, 169, 170, 171, 172.4, 176, 205, 207, 209, 218, 230.4, 231, 242, 245.2, 246, 253 

MODEL 212 except CODE Z04 (Light armoring) 

Fig 1: Identifying Feeler Gauge (129 589 03 21 00)

Courtesy of MERCEDES-BENZ USA

Fig 2: Windshield Gap Dimension - Shown On Model 212, 218

Courtesy of MERCEDES-BENZ USA

Fig 3: Windshield Gap Dimension - Shown On Model 207, 209, 231

Courtesy of MERCEDES-BENZ USA

Fig 4: Windshield Gap Dimension - Shown On Model 117, 156, 169, 170, 171, 172, 176, 205, 230, 242, 245, 246, 253

Courtesy of MERCEDES-BENZ USA

1. Place windshield (1) down on windshield rubber spacers on body flange.
2. Center windshield (1) in body opening.
3. Adjust gap dimension (A) with feeler gauge.
Fig 5: Gluing On Strips Of Adhesive Tape
Courtesy of MERCEDES-BENZ USA
4. Glue on strips of adhesive tape (arrows).
5. Cut through adhesive strips (arrows) at top of windshield (1).
6. Remove windshield (1) from vehicle.