Prepare rear panoramic roof cover for installation - AR77.21-P-0751-01EW

MODEL 204.3, 207.3, 212.0 with CODE (413) Panoramic glass roof with top sliding roof

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1089-02A	Repair kit, installing window, 1-component adhesive, replaced by: A 221 670 81 01	A 221 670 21 01

Fig 1: Panoramic Roof Cover

Courtesy of MERCEDES-BENZ USA

Wear cotton gloves. Fingerprints should not occur anywhere on the inside of the panoramic roof cover (1). To prevent adhesion disturbances when installing windows, ensure that the entire inside of the panoramic roof cover (1) are free of dust, oil, grease, wax, contamination residues and other adhesive substances.

Check panoramic roof cover (1) for damage.
Apply cleaner with part of paper towel to entire inside of panoramic roof cover (1) and wipe with remaining paper towel.
Allow cleaner to dry completely.
Uniformly apply primer over full surface in crosshatched area on panoramic roof cover (1).
Observe drying time of at least 10 minutes. Apply primer to inside of panoramic roof cover (1). Use same bonding area as on removed panoramic roof cover (1)