Retrofit Bluetooth (®) module for Drive Kit Plus for smartphones - AZ82.60-P-0027-07EWA

MODEL 212.0 

MODEL 212.2 

The following operation steps describe installation in a left-hand drive vehicle. With right-hand drive vehicles these operation steps must be carried out mirror-inverted.

1. Stick felt tape (47) to the top side of the Bluetooth module (35).
2. Stick Velcro strip (48) to underside of the Bluetooth module (35).
   Fig 1: Bluetooth Module Velcro Strip Applying Area

   Courtesy of MERCEDES-BENZ USA
3. Connect black 4-pin connector (40.1) to the Bluetooth module (35).
4. Connect white 4-pin connector (41.1) to the Bluetooth module (35).
5. Remove carrier foil on the Velcro strip of the Bluetooth module (35).
6. Glue Bluetooth module (35) to the transmission tunnel.
   Fig 2: Bluetooth Module Connector

   Courtesy of MERCEDES-BENZ USA