Remove/install Parktronic system (PTS) sensors in rear bumper - AR54.65-P-0002EW
MODEL 207 with CODE (220) PARKTRONIC with CODE (230) Advanced Parking Guidance
MODEL 212 with CODE (220) PARKTRONIC with CODE (230) Advanced Parking Guidance
Shown on model 212.0
Fig 1: Identifying Parktronic System Sensors In Rear Bumper Remove/Install Components - Shown On Model 212.0
Model 207.3
| Remove/install | |||
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | AS00.00-Z-0010-01A | |
| 1 | Lift vehicle on lifting platform. | Model 207, 212.2 without code (550) AHV | |
| 2.1 | Remove bolts (5) | Model 207 | |
| 2.2 | Remove rear bumper (1) | Model 212.0, 212.2 with code (550) AHV | AR88.20-P-2200EW |
| 3 | Disconnect electrical connector (2) on the appropriate distance sensor (B8/7, B8/8, B8/9 or B8/10) | ||
| 4 | Unlock locks of bracket (3) (arrows) and unclip the appropriate distance sensor (B8/7, B8/8, B8/9 or B8/10) from the bracket (3) | ||
| 5 | Remove appropriate distance sensor (B8/7, B8/8, B8/9 or B8/10) from the rear bumper (1) | ||
| 6 | Install in the reverse order |