Wiring diagram for COLLISION PREVENTION ASSIST control unit - PE30.30-P-2104-97DAA
ENGINE 157, 274, 276, 278, 642, 651 in MODEL 212 with CODE 258 (Collision Prevention Assist) as of model year 2014 Control unit A90
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Color code key | 15L |
| A90 | COLLISION PREVENTION ASSIST controller unit | 4A |
| A90 | COLLISION PREVENTION ASSIST controller unit | 11A |
| A90b1 | 5A | |
| A90n1 | 2A | |
| Code 235 | Active Park Assist | 3D |
| Code 235 | Active Park Assist | 3D |
| Code 271 | Autonomous intervention by the brake system / pedestrian protection | 4D |
| Code 271 | Autonomous intervention by the brake system / pedestrian protection | 9D |
| N10/1 | Front SAM control unit with fuse and relay module | 12L |
| N10/1f36 | Fuse 36 | 10L |
| U232 | Valid for short range radar without active Park Assist | 8D |
| U232 | Valid for short range radar without active Park Assist | 9D |
| U265 | Not valid for pedestrian protection | 4D |
| U265 | Not valid for pedestrian protection | 8D |
| W2 | Right front ground point at lamp unit | 6L |
| X26/38 | Front bumper and frame wiring harness electrical connector | 5F |
| X26/38 | Front bumper and frame wiring harness electrical connector | 10F |
| X30/30 | Vehicle floor chassis CAN voltage distributor electrical connector | 8L |
| Z36/30 | Short range radar front sensor ground connector sleeve | 1E |