Removing and installing rear air nozzle - AR83.10-P-4800EL

MODEL 218 

Fig 1: Removing/Installing Rear Air Nozzle

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
1	Switch off ignition and remove transmitter key or KEYLESS-GO start/stop button from electronic ignition lock control unit	KEYLESS-GO start/stop button only on vehicles with code (889) Keyless-Go.
2	Remove rear center console	MODEL 218.3
			AR68.20-P-2020EL
3	Open stowage compartment (2) in front center console
4	Remove screws/bolts (3)
5	Disconnect air vent (1) at catch hooks (5) from center console and lift up until electrical connectors (6, 7) are accessible	Insert air vent (1) first (arrow).
6	Remove screws/bolts (4)
7	Disconnect electrical connectors (6, 7) and remove air vent (1) upwards out of vehicle
8	Remove rear automatic air conditioning operating unit (N22/4)	With CODE 581 (Comfort automatic air conditioning) When replacing air vent (1)
			AR83.40-P-6350ELH
9	Install in the reverse order