Retrofit tablet PC mount - AZ82.80-P-0003EL

MODEL 218.3##/9## 1# without CODE 432 (Left and right dynamic multicontour seat) 

Fig 1: Identifying Tablet PC Mount

Courtesy of MERCEDES-BENZ USA

	Remove
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
1	Detach right front seat
			AR91.10-P-1000CW
		The following operation steps are shown on the right side of the vehicle and can be accomplished analogously on the left side of the vehicle. Clarification shall need to be reached with the customer regarding the side of the vehicle on which the Tablet PC mount (3) is to be installed.
2	Remove seat-back lining from right front seat backrest
			AR91.10-P-1910CW
3.1	Detach right front seat head restraint motor	Only with CODE 275 (Memory package for electrically adjustable front seats)
			AR91.29-P-1432CW
		Do not completely remove the head restraint, simply loosen it.
3.2	Move right front seat head restraint all the way to the top	Only except code 275 (Memory package for electrically adjustable front seats)
	Install
4	Make cutout for Tablet PC mount bracket (3)		AZ82.80-P-0003-07EW
5	Retrofit Tablet PC mount control unit	Only with CODE 275 (Memory package for electrically adjustable front seats)
			AZ82.80-P-0003-01EW
6	Retrofit wiring harness for Tablet PC mount (3)	Only with CODE 275 (Memory package for electrically adjustable front seats)	AZ82.80-P-0003-02EWA
		Only except code 275 (Memory package for electrically adjustable front seats)	AZ82.80-P-0003-02EW
7	Retrofit bracket for Tablet PC mount (3)		AZ82.80-P-0003-04EW
		Screw/bolt, tablet PC mount bracket to seat	Table PC Mount *BA82.80-P-1001-01A
8	Retrofit Tablet PC mount (3)		AZ82.80-P-0003-03CW
9	Install remaining parts
10	Document retrofitted equipment via vehicle documentation (VeDoc)	Attach note "Tablet PC mount retrofitted as per AZ82.80-P-0003EL " to design group 82.