Retrofit Audio 20 CD including preinstallation for Garmin(R) MAP PILOT - AN82.60-P-0019ELX

MODEL 218.3/9 with CODE 505 (Radio 20 NTG5, not navigation-enabled) without CODE 460 (Canada version) without CODE 494 (US version) without CODE 498 (Japanese version) without CODE 830 (Vehicles for China, additional parts) 

Fig 1: Identifying Radio And Audio/COMAND Display

Courtesy of MERCEDES-BENZ USA

	Remove
1	Remove radio (A2)
			AR82.60-P-7502EW
		The Audio 20 CD radio (A2) is no longer required.
	Install
2	Install radio (A2) (Audio 20 CD including preinstallation for Garmin® MAP PILOT)
			AR82.60-P-7502EW
	Update Vehicle Documentation (VeDoc)
3	Attach note "Audio 20 CD including preinstallation for Garmin® MAP PILOT retrofitted as per AN82.60-P-0019ELX " under field organization texts to design group 82
4	Delete special equipment in online vehicle data card via Vehicle Documentation System (VeDoc)	Delete:  CODE 505 (Audio 20 CD)
5	Enter special equipment in online vehicle data card via Vehicle Documentation System (VeDoc)	Enter:  CODE 522 (Audio 20 CD including preinstallation for Garmin® MAP PILOT)
6	Connect diagnostic system and select vehicle via the vehicle identification number (VIN)
			AD00.00-P-2000-04A
7	Perform variant coding with XENTRY using the Software Calibration Number (SCN) on "Audio 20 CD including preinstallation for Garmin® MAP PILOT"
8	Disconnect diagnostic system
			AD00.00-P-2000-04A
	Check
9	Perform function test	See operator's manual of Audio 20 CD including preinstallation for Garmin® MAP PILOT.