Turbocharger - BA09.40-P-1000-01K
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 642
MODIFICATION NOTES
| 29.2.12 | Value changed: Screw/bolt, oil supply connection fitting to cylinder crankcase | ||
| 26.4.12 | Value changed: Fit bolt, turbocharger to oil supply connection fitting | ||
| 27.4.12 | Value changed: Fit bolt, turbocharger to oil supply connection fitting |
TURBOCHARGER
| Number | Designation | ENGINE 642 | ||
|---|---|---|---|---|
| BA09.40-P-1001-01K | Flange connection, exhaust manifold to turbocharger | Nm | - | |
| BA09.40-P-1002-01K | Screw/bolt, oil drain line to turbocharger | Nm | - | |
| BA09.40-P-1003-01K | Screw/bolt, oil feed line to turbocharger | Nm | - | |
| BA09.40-P-1004-01K | Screw/bolt, oil feed line to cylinder head | Nm | - | |
| BA09.40-P-1005-01K | Connection of turbocharger to front catalytic converter | Nm | - | |
| BA09.40-P-1006-01K | Screw/bolt, exhaust collector pipe support brace to exhaust collector pipe | M8X25 | Nm | 30 |
| BA09.40-P-1007-01K | Screw/bolt, exhaust collector pipe support brace to cylinder crankcase | Nm | 20 | |
| BA09.40-P-1008-01K | Screw/bolt, oil supply connection fitting to cylinder crankcase | Nm | 20 | |
| BA09.40-P-1009-01K | Turbocharger support brace to charge air manifold | Nm | 9 | |
| BA09.40-P-1010-01K | Fit bolt, turbocharger to oil supply connection fitting | Stage 1 | Nm | 20 |
| Stage 2 | ∠° | 60 | ||
| BA09.40-P-1011-01K | Screw/bolt, turbocharger to exhaust collector pipe | Stage 1 | Nm | 20 |
| Stage 2 | ∠° | 90 | ||
| BA09.40-P-1012-01K | Exhaust line to turbocharger | Nm | 20 | |
| BA09.40-P-1013-01K | Screw/bolt, coolant line to turbocharger/charge air distribution line | Nm | 9 | |