Check brake system for leaks - AR42.10-P-0100-01V
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 117, 156, 171, 172, 176, 190, 204, 205, 207, 212, 216, 217, 218, 221.0/1, 222, 231, 242, 246, 253
MODEL 211, 219 with ADAPTIVE BRAKE
- After bleeding the brake system, press the brake pedal firmly several times in order to bring the brake pads into contact with the brake disks.
- Start the engine and press the brake pedal with approx. 200 to 300 N.
The pressure built up in the brake system must be held without it being possible to depress the brake pedal further.
- Check connection fittings and hose connections as well as all components on the brake system for leaktightness.
If leaks are found:
Repair the affected components of the brake system.
- Check fluid level in expansion reservoir for brake fluid.
If necessary:
Correct fluid level in expansion reservoir.