Notes on acoustic foam and structural foam in the vehicle - AH60.00-P-0039-01A

WARNING: This page does not describe the selected car, but rather 202 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 222

MODEL 217

Foam items in area of sidewall (shown on left side of vehicle)

The structural foam pieces must be replaced if they cannot be left in the vehicle undamaged. 2-component structural foam adhesive is used as filling foam and to fit the carrier parts.

Acoustic foam part replacements are inserted using sealant at all the cleaned body contact surfaces.

Shown on model 222.0

Fig 1: Identifying Sidewall Foam Area (Shown On 222.0)

Courtesy of MERCEDES-BENZ USA

Shown on model 222.9

Fig 2: Identifying Sidewall Foam Area (Shown On 222.9)

Courtesy of MERCEDES-BENZ USA

Shown on model 217.4

Fig 3: Identifying Sidewall Foam Area - Shown On 217.4 (1 Of 2)

Shown on model 217.4

Fig 4: Identifying Sidewall Foam Area - Shown On 217.4 (2 Of 2)