LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2016 >> CLS400 4Matic >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Electrical System, Equipment & Instruments - General Information) >> Electrical System, Equipment & Instructions - General Information >> Notes on no-load current consumption >> Notes on no-load current consumption - AH54.10-P-0003-01T

Notes on no-load current consumption - AH54.10-P-0003-01T

WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 211 

Example of a measured curve of no-load current consumption 

Fig 1: No-Load Current Consumption Curve
G07500589Courtesy of MERCEDES-BENZ USA

IMPORTANT The following parameters are to be observed:

Values 1.2 to 1.9 A: No bus idle; one control unit keeps the entire bus awake.

Value between 80 and 180 mA: One control unit is not shutting down and this leads to an increased no-load current.

Value < 60 mA: This is the value that should be reached after 30 minutes at the latest.