Notes on calibration of reversing camera - AH54.65-P-0022-01SX

WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 164 with CODE 498 (Japanese version) without CODE 849 (Spare wheel holder/spare wheel)

MODEL 207, 212 up to model year 2014 with CODE 498 (Japanese version)

MODEL 216.3 up to 5/31/07, 221.0/1 up to 5/31/07 without CODE 498 (Japanese version)

MODEL 221.0/1, 251 with CODE 498 (Japanese version)

Calibration of the backup camera

The backup camera must be calibrated in the following cases:

After replacing the reversing camera control unit.
After removing the reversing camera.
After adjusting or removing the trunk lid.
After removal of the front passenger mirror on vehicles with CODE 498 (Japan version).
After changes to the suspension which influence the suspension level.
After work on the steering system which influences the learned steering angle values e.g. replacing the steering angle sensor.
When using tires with another diameter.