Notes on installing brake hoses - AH42.10-P-9406-01GH
WARNING: This page does not describe the selected car, but rather 199 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 163
Only install brake hoses which are approved by Mercedes-Benz.
Otherwise the required brake power may not be reached.
When connecting up brake hoses (51), ensure that the brake hose is not twisted. A minimum distance of 15 mm from other axle components must be guaranteed in all driving situations.
Front axle: The installation position of the brake hose (51) on the bracket (52) is specified by the groove on the bracket and the tab on the brake hose connection.
Rear axle: A bihexagon is available in the bracket (52). Insert the brake hose (51) into the bracket (52) such that the it does not chafe when the vehicle is compressed and rebounded.