LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2016 >> CLS400 4Matic >> Repair and Diagnosis >> External Pages >> Different car >> Section 159 (Electrical System - Body - Maintenance) >> Electrical System - Body - Maintenance >> Check setting of high beam >> Check setting of high beam - AP82.10-P-8260-02EW

Check setting of high beam - AP82.10-P-8260-02EW

WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 212, 218 with halogen headlamps 

Fig 1: Caution For Adjusting Headlamp Aimer (Model 212, 218)
G10038191Courtesy of MERCEDES-BENZ USA

IMPORTANT The center of the light beam must be positioned on the central mark (1) in the headlamp aimer (01).

  1. INSPECT Check setting of high beam.

    IMPORTANT In event of deviation, check that bulb is seated correctly in headlamp.

    IMPORTANT Do not  make any correction to the adjustment screws for the headlamp height adjustment (H) and the adjustment screws for the headlamp side adjustment (S), as this would adjust the previously set low beam.