000 588 01 82 00 Filling unit - WS25.00-P-0016B

MODEL ALL

Purpose:

Filler/bleeder unit for filling, flushing and bleeding brake and clutch systems.

Procurement information:

The sale and distribution of this workshop equipment does not take place via the regular replacement part ordering process at the GLC/LC but directly via the manufacturer/supplier. Recommended workshop equipment and information on the manufacturers/suppliers can be found in the WS document (see below).

Fig 1: Identifying Filling Unit (000 588 01 82 00)

Courtesy of MERCEDES-BENZ USA

NOTE: Please note the manufacturer-specific accessories.

Manufacturer 1

GL-GmbH Werkstatttechnik

Nurtinger Strasse 23-25

72636 Frickenhausen, Germany

Germany

Type/Model: Perfecta 20 MB
Article no.: 900.021.000
Type/Model: Perfecta 20 Plus
Article no.: 901.920.000
Type/Model: Perfecta 60
Article no.: 900.060.000
Type/Model: Perfecta 60 Plus
Article no.: 901.960.000
Accessories: Adapter set ACTROS-HPS1/EAS
Article no.: 800600

Manufacturer 2

ROMESS Rogg Apparate + Electronic GmbH

Dickenhardtstr. 67

78054 VS-Schwenningen

Germany

Type/Model: Romeos S 15
Article no.: 1015
Type/Model: Romeos S 30-60
Article no.: 1322
Type/Model: Romeos SE 30-60
Article no.: 1333
Accessories: Adapter set ACTROS-HPS1/EAS
Article no.: 50400