Intake manifold - BA09.20-P-1000-01S
ENGINE 159
INTAKE MANIFOLD
| Number | Designation | ENGINE 159 | |||
|---|---|---|---|---|---|
| BA09.20-P-1001-01S | Screw/bolt, pressure sensor/fuel to fuel distributor | Nm | 5 | ||
| BA09.20-P-1002-01S | Screw/bolt, intake manifold to cylinder head | Stage 1 | Nm | 10 | |
| Stage 2 | ∠° | 90 | |||
| BA09.20-P-1003-01S | Purge line on intake manifold | Nm | 10 | ||
| BA09.20-P-1004-01S | Bolt, pressure sensor to intake manifold/collector | Initial installation | Nm | 10 | |
| Follow-up operations | Nm | 10 | |||
| BA09.20-P-1005-01S | Fastening, intake manifold/cover/collector to intake manifold/intake manifold lower section/collector | M6X16 M6X35 | Stage 1 | Nm | 5 |
| Stage 2 | ∠° | 90 | |||
| M8X40 | Stage 1 | Nm | 10 | ||
| Stage 2 | ∠° | 90 | |||
| BA09.20-P-1006-01S | Vent line at intake manifold | Nm | 9 | ||