LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2016 >> C63 AMG >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Wheels, Chassis Alignment Check - 205 Chassis >> Testing & Repair >> Remove/install wheels - AR40.10-P-1101A

Remove/install wheels - AR40.10-P-1101A

MODEL 205 

MODEL 253 

Tightening sequence 

Fig 1: Wheel Bolts Tightening Sequence
G10133202Courtesy of MERCEDES-BENZ USA

Rotate complete wheels 

Fig 2: Wheel And Tire Rotation Pattern
G10133203Courtesy of MERCEDES-BENZ USA
NOTES Information on tires/rims   AH40.10-P-9411-01A
IMPORTANT Notes on handling, transport and storage of composite brake disks   AH42.10-P-9406-12LF
REMOVING Remove     
1 Raise vehicle   AR00.60-P-1002LWG
2 Remove wheel trim Vehicle with hubcaps.  
3 Remove wheel bolts and remove wheel-and-tire assemblies SPECIAL TOOL Socket wrench Fig 3
INSPECT Check     
4 Check tires for signs of damage and make sure that they are in good condition    
REFER TO MAINTENANCE AP40.10-P-4051EW 
INSTALLING Install     
5 Clean and check wheel bolt connection components, then protect against corrosion   AR40.10-P-1100-02A
NOTES
Before mounting a wheel-and-tire assembly all the following operation steps must be carefully conducted.
The complete wheel can otherwise work its way loose from the vehicle.
Assembly cleaner *BR00.45-Z-1028-04A 
Paste, hot lubrication 1 kg, DBL 6879.20 *BR00.45-Z-1005-06A 
6 Change round wheel-and-tire assemblies on front and rear axles If necessary and only on vehicles without mixed tires.
NOTES
Note running direction of wheel-and-tire assemblies.
Otherwise handling characteristics and handling comfort may be impaired and tire wear increased.
 
7 Mount wheel-and-tire assembly and tighten wheel bolts IMPORTANT Observe the tightening sequence (1 to 5).  
TORQUE SPECIFICATION Wheel bolt *BA40.10-P-1001-01M 
SPECIAL TOOL Socket wrench Fig 3
8 Lower vehicle   AR00.60-P-1002LWG
9 Correct tire pressure of front and rear axle tires    
REFER TO MAINTENANCE Correct tire inflation pressure AP40.15-P-4061A 
10 Attach hubcaps Vehicle with hubcaps.
NOTES
Check for correct positioning of hubcaps relative to valve and check for firm seating. Otherwise, the valve may be damaged or the hubcaps may be lost.
 
11 Restart tire pressure monitor using instrument cluster Model 205, 253
with code 475 (Tire pressure monitoring system)
IMPORTANT Select following menu items:
Service →
Tire pressure
 
WHEELS

Number Designation Model 205 Model 253
BA40.10-P-1001-01M Wheel bolt Nm 130 150
Fig 3: Identifying Socket Wrench (199 589 01 09 00)
G10133204Courtesy of MERCEDES-BENZ USA
REPAIR MATERIALS

Number Designation Order number
BR00.45-Z-1005-06A Paste, hot lubrication 1 kg, DBL 6879.20 A 000 989 76 51
BR00.45-Z-1028-04A Assembly cleaner Adolf Wurth GmbH & Co. KG