Retrofit Adaptive Highbeam Assist - AN82.10-P-0010LW
MODEL 205.### 1# as of 6/1/15 up to 5/31/18
with CODE 238 (Active lane keeping Assist)
with CODE 632 (Headlamps, LED, static, right-side traffic)
MODEL 205.### 1# as of 6/1/15 up to 5/31/18
with CODE 476 (Lane keeping assist)
with CODE 632 (Headlamps, LED, static, right-side traffic)
MODEL 205.### 1# as of 6/1/15 up to 5/31/18
with CODE 513 (Speed Limit Assist)
with CODE 632 (Headlamps, LED, static, right-side traffic)
MODEL 205.### 2# as of 6/1/15 up to 5/31/18
with CODE 238 (Active lane keeping Assist)
with CODE 631 (Static LED headlamps, left-hand traffic)
MODEL 205.### 2# as of 6/1/15 up to 5/31/18
with CODE 476 (Lane keeping assist)
with CODE 631 (Static LED headlamps, left-hand traffic)
MODEL 205.### 2# as of 6/1/15 up to 5/31/18
with CODE 513 (Speed Limit Assist)
with CODE 631 (Static LED headlamps, left-hand traffic)
| Update Vehicle Documentation (VeDoc) | |||
| 2 | Enter special equipment into the online vehicle data card | ||
| 3 | Attach note Adaptive Highbeam Assist retrofitted as per AN82.10-P-0010LW under field organization texts to design group 54 and design group 82 | ||
| 4 | Connect diagnostic system and select vehicle using FIN | ||
| AD00.00-P-2000-04B | |||
| 5 | Carry out variant coding using software calibration number (SCN) | Signal acquisition and actuation module (SAM) Multifunction camera (MFK) Instrument cluster (KI) Headlamp (SW) |
|
| 6 | Disconnect diagnostic system | ||
| AD00.00-P-2000-04B | |||
| Check | |||
| 7 | Perform function test |
| Part no. | Designation | Quantity |
|---|---|---|
| KG 99 | Parts kit for automatic high beam control software retrofit | 1 |