Rear Wall & Rear End - 205 Chassis
- General Information
- Testing & Repair
- Remove/install rear wall paneling - AR64.10-P-1100LW
- Remove/install rear wall - AR64.10-P-5746LW
- Remove/install roll bar mount - AR64.20-P-0003LWR
- Replace complete bottom rear center section - AR64.20-P-1000LWR
- Replace complete rear end
- Replace top rear crossmember for soft-top compartment - AR64.20-P-1150LWR
- Repair rear end on left side
- Completely remove/install rear longitudinal member
- Replace spare tire well
- Replace crossmember above rear axle - AR64.20-P-1301LW
- Torque Specifications
- Special Tools