Rear Axle Torsion Bar - BA32.20-P-1000-04S
Model 205, 206, 213, 238
REAR AXLE TORSION BAR
| Number | Designation | Model 206.076/078/080/276/278/280 | Model 206 (except 206.076/078/080/276/278/280) | ||
|---|---|---|---|---|---|
| BA32.20-P-1001-04S | Bolt, torsion bar linkage to torsion bar | Stage 1 | Nm | 50 | 60 |
| Stage 2 | ∠° | - | - | ||
| BA32.20-P-1002-04S | Nut, torsion bar to rear axle carrier | Stage 1 | Nm | 100 | 80 |
| Stage 2 | ∠° | 45 | - | ||
| BA32.20-P-1003-04S | Nut, torsion bar linkage to spring control arm | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA32.20-P-1004-04S | Bolt, torsion bar linkage to wheel carrier | Nm | 50 | 50 | |
REAR AXLE TORSION BAR
| Number | Designation | Model 205 (except 205.086/087/286/287/386/387/486/487) except code 489 (AIRMATIC) | Model 205 (except 205.086/087/286/287/386/387/486/487) with code 489 (AIRMATIC) | ||
|---|---|---|---|---|---|
| BA32.20-P-1001-04S | Bolt, torsion bar linkage to torsion bar | Stage 1 | Nm | 63 | 63 |
| Stage 2 | ∠° | - | - | ||
| BA32.20-P-1002-04S | Nut, torsion bar to rear axle carrier | Stage 1 | Nm | 80 | 80 |
| Stage 2 | ∠° | - | - | ||
| BA32.20-P-1003-04S | Nut, torsion bar linkage to spring control arm | Stage 1 | Nm | 20 | 35 |
| Stage 2 | ∠° | 180 | 120 | ||
| BA32.20-P-1004-04S | Bolt, torsion bar linkage to wheel carrier | Nm | - | - | |
REAR AXLE TORSION BAR
| Number | Designation | Model 205.086/087/286/287/386/387/486/487 | Model 213 (except 213.088/089/288/289) except code 489 (AIRMATIC) | ||
|---|---|---|---|---|---|
| BA32.20-P-1001-04S | Bolt, torsion bar linkage to torsion bar | Stage 1 | Nm | 30 | 63 |
| Stage 2 | ∠° | 90 | - | ||
| BA32.20-P-1002-04S | Nut, torsion bar to rear axle carrier | Stage 1 | Nm | 80 | 80 |
| Stage 2 | ∠° | - | - | ||
| BA32.20-P-1003-04S | Nut, torsion bar linkage to spring control arm | Stage 1 | Nm | - | 20 |
| Stage 2 | ∠° | - | 180 | ||
| BA32.20-P-1004-04S | Bolt, torsion bar linkage to wheel carrier | Nm | 50 | - | |
REAR AXLE TORSION BAR
| Number | Designation | Model 213 (except 213.088/089/288/289) with code 489 (AIRMATIC) | Model 213.088/089/288/289 | ||
|---|---|---|---|---|---|
| BA32.20-P-1001-04S | Bolt, torsion bar linkage to torsion bar | Stage 1 | Nm | 63 | 30 |
| Stage 2 | ∠° | - | 90 | ||
| BA32.20-P-1002-04S | Nut, torsion bar to rear axle carrier | Stage 1 | Nm | 80 | 80 |
| Stage 2 | ∠° | - | - | ||
| BA32.20-P-1003-04S | Nut, torsion bar linkage to spring control arm | Stage 1 | Nm | 35 | - |
| Stage 2 | ∠° | 120 | - | ||
| BA32.20-P-1004-04S | Bolt, torsion bar linkage to wheel carrier | Nm | - | 50 | |
REAR AXLE TORSION BAR
| Number | Designation | Model 238 except code 489 (Airmatic) | Model 238 With code 489 (AIRMATIC) | ||
|---|---|---|---|---|---|
| BA32.20-P-1001-04S | Bolt, torsion bar linkage to torsion bar | Stage 1 | Nm | 63 | 63 |
| Stage 2 | ∠° | - | - | ||
| BA32.20-P-1002-04S | Nut, torsion bar to rear axle carrier | Stage 1 | Nm | 80 | 80 |
| Stage 2 | ∠° | - | - | ||
| BA32.20-P-1003-04S | Nut, torsion bar linkage to spring control arm | Stage 1 | Nm | 20 | 35 |
| Stage 2 | ∠° | 180 | 120 | ||
| BA32.20-P-1004-04S | Bolt, torsion bar linkage to wheel carrier | Nm | - | - | |