Electrical Function Schematic For Stationary Charging - PE54.10-P-2073-97FBH
Model 205.047/147/247, 253.954 with engine 274.920 Model 253.354 with engine 274.920
| Code: | Designation: | Position: |
|---|---|---|
| 1 | Charging current, energy flow | 26D |
| 1 | Charging current, energy flow | 33E |
| 10 | Lock charging cable, actuation | 28B |
| 11 | Charging voltage and charging current, request | 25E |
| 12 | Wheel speed, signal | 15B |
| 13 | Instrument cluster message, request | 18J |
| 13 | Instrument cluster message, request | 25J |
| 2 | Control Pilot, status | 28C |
| 2 | Control Pilot, status | 14C |
| 3 | External communication, data | 27B |
| 3 | External communication, data | 28C |
| 4 | Indicator lamp, actuation | 28B |
| 5 | Charging voltage and charging current, signal | 15E |
| 6 | Proximity detection, signal | 28C |
| 6 | Proximity detection, signal | 16D |
| 6 | Proximity detection, signal | 3F |
| 6 | Proximity detection, signal | 9F |
| 7 | Tolerable charging voltage/current, signal | 16E |
| 7 | Tolerable charging voltage/current, signal | 15G |
| 8 | Operating mode, status | 15J |
| 8 | Operating mode, status | 20J |
| 9 | Gear range, status | 6F |
| 9 | Gear range, status | 11F |
| A1 | Instrument cluster | 26J |
| A100 | High-voltage battery module | 36E |
| A100 | High-voltage battery module | 36H |
| A100g1 | High-voltage battery | 35F |
| A100g1 | High-voltage battery | 36J |
| CAN C | Engine CAN | 10F |
| CAN C1 | Drivetrain CAN | 4F |
| CAN HMI | User interface CAN | 22K |
| CAN L | Hybrid CAN | 19E |
| CAN L | Hybrid CAN | 19G |
| Code ME05 | HYBRID DRIVE 80 KW VARIANT (INCLUDING PLUGIN) | 33G |
| Code ME05 | HYBRID DRIVE 80 KW VARIANT (INCLUDING PLUGIN) | 25D |
| Code ME06 | Hybrid drive 50 KW VARIANT (INCLUDING PLUGIN) | 33D |
| Code ME06 | Hybrid drive 50 KW VARIANT (INCLUDING PLUGIN) | 25D |
| Flex E | Chassis FlexRay | 16K |
| Flex E | Chassis FlexRay | 16C |
| N127 | Drivetrain control unit | 13E |
| N3/10 | ME-SFI [ME] control unit | 7F |
| N30/4 | Electronic Stability Program control unit | 18B |
| N73 | Electronic ignition switch control unit | 19J |
| N82/2 | Battery management system control unit | 36E |
| N82/2 | Battery management system control unit | 34J |
| N83/5 | Charger | 26E |
| U1253 | Valid for model 253 | 17B |
| U390 | Valid for model 205 | 17A |
| X58/23 | Charger feed-in socket | 26A |
| Y3/8n4 | Fully integrated transmission control, control unit | 2F |