Check/Adjust Heads-Up Display - AR54.30-P-6401LW

Model 205, 213, 238, 253 

with code 463 (Head-up display) 

	Check
1	Park the vehicle on a horizontal, level surface
2	Close engine hood, doors and trunk lid or liftgate
3.1	Insert transmitter key and turn to position "1"	Model 205, 253 with code 463 (Head-up display) except code 889 (KEYLESS-GO) except code 893 (KEYLESS-GO) Circuit 15 R is engaged. No fault messages must be displayed on the multifunction display.
3.2	Press KEYLESS-GO start-stop button once	Model 205, 253 with code 463 (Head-up display) with code 889 (KEYLESS-GO) Model 205, 253 with code 463 (Head-up display) with code 893 (KEYLESS-GO) Model 213, 238 with code 463 (Head-up display) Circuit 15 R is engaged. The foot brake may not be operated. No fault messages must be displayed on the multifunction display.
4	Set driver's seat to correct ergonomic position
5	Activate head-up display
6	Check heads-up display	Model 213, 238 with code 463 (Head-up display)	AR54.30-P-6401-02LWO
		Model 205, 253 with code 463 (Head-up display) If the test images are not shown correctly ↓ Adjust head-up display using diagnostic system Model 205, 253 with code 463 (Head-up display)	AR54.30-P-6401-02LW
		Adjust head-up display via multifunction display. Model 213, 238 with code 463 (Head-up display)	AD00.00-P-2000-04B