Check/Correct Transmission Oil Level On Transfer Case - AR28.10-P-0100-06A
Model 205, 213, 217, 218, 222, 238, 253, 257, 290 with transmission 725.0 (except 725.06/09) with code M005 (4MATIC)
COMPLETE TRANSFER CASE
| Number | Designation | Model 205, 213, 217, 218, 222, 238, 253, 257, 290 with transmission 725.0 with code M005 (4MATIC) | |
|---|---|---|---|
| BA28.10-P-1003-01G | Drain screw to transfer case | Nm | 25 |
COMPLETE TRANSFER CASE
| Number | Designation | Model 205, 213, 217, 218, 222, 238, 253, 257, 290 with transmission 725.0 with code M005 (4MATIC) | |
|---|---|---|---|
| BA28.10-P-1007-01G | Oil level sight glass to transfer case | Nm | 11 |
COMPLETE TRANSFER CASE
| Number | Designation | Model 167, 205, 213, 217, 218, 222, 238, 253, 257, 290 with transmission 725.0 | ||
|---|---|---|---|---|
| BF28.10-P-1001-01F | Transfer case oil | Filling capacity | Liter | 0, 5 |
| Specification sheet | BB00.40-P-0236-15A | |||
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1028-04A | Assembly cleaner | Adolf Wurth GmbH & Co. KG |
Shown: model 218
Cleaning
- Clean area surrounding drain screw (2) and oil level screw (3).
Remove
- Unscrew oil level screw (3) far enough until it makes contact with the drain screw (2).
- Remove drain screw (2).
Cleaning
- Clean threaded hole of drain screw (2).
- Clean drain screw (2).
Fill
- Insert filler hose of
hand pump into threaded hole of drain screw (2) until it is positioned at the upper edge of the overflow pipe.
- Add transfer case oil using
- Drain transfer case oil from threaded hole of drain screw (2) until the flow of transfer case oil stops.
Install
- Screw in drain screw (2) on transfer case then tighten
.
- Screw in oil level screw (3) and tighten