Perform Wheel Alignment Check - AR40.20-P-0200LW
Model 205
Model 213
Model 253
Model 293
| Check | |||
| 1 | Check condition of vehicle. | The specified tolerances of vehicle specified values are only for the test. If the vehicle is adjusted, the specified values should be aimed for. |
|
| 2 |
Check condition and tire tread depth of tires. | AP40.10-P-4052B | |
| 3 | Check rims for damage. | ||
| 4 |
Check and correct tire pressure. | AP40.15-P-4061A | |
| 5 |
Check vehicle underside for damage and corrosion of suspension, chassis and load-bearing body parts. | Model 205 | AP60.00-P-0051EW |
| Model 213 | AP60.00-P-0051D | ||
| Model 253 (except 253.99) | AP60.00-P-0051C | ||
| Model 253.99 | AP60.00-P-0051K | ||
| Model 293 | AP60.00-P-0051V | ||
| 6 |
Check condition of the steering mechanism. | Model 205, 213, 253 | AP46.00-P-4651A |
| Model 293 | AP46.00-P-4651H | ||
| 7 |
Check front axle joints for play and check dust boots for damage. | Model 205, 213, 253 | AP33.10-P-3358A |
| Model 293 | AP33.10-P-3358H | ||
| 8 |
Check rear axle joints for play and check dust boots for damage. | Model 293 | AP35.20-P-3552I |
| Model 205, 213, 253 (except 253.99) | AP35.20-P-3552A | ||
| Model 253.99 | AP35.20-P-3552FC | ||
| 9 |
Check condition of shock absorbers and springs. | Model 293 | AP32.25-P-3255H |
| Model 253 | AP32.25-P-3255E | ||
| Model 205, 213 | AP32.25-P-3255A | ||
| Preparatory tasks | |||
| 10 |
Print out form for wheel alignment measurement. Wheel Alignment Form |
If a visual wheel alignment measurement is performed. | OF40.20-P-3000-01B |
| 11 | Select drive program "Sport". | Model 205 with engine 177 Model 205 with engine 276 with code M005 (4MATIC) with code M016 (Uprated engine) Model 213 with engine 177 Model 213 with engine 276 with code M005 (4MATIC) with code M016 (Uprated engine) |
|
| 12 | Drive the vehicle onto measuring station and secure using parking brake. | ||
| 13 | Unlock turn and slip plates. | ||
| 14.1 | Raise vehicle level and lower again. | Model 205, 213, 253 with code 489 (AIRMATIC) |
|
| 14.2 | Rock vehicle to settle suspension on front and rear axles several times. | Model 205, 213, 253 except code 489 (AIRMATIC) |
|
| 14.3 | Rock vehicle on front axle several times to settle suspension. | Model 293 | |
| 15 | Switch off easy entry and exit feature. | Model 205, 253, 293 with code 275 (Driver's seat, electrically adjustable with memory function) Model 213 with code 275 (Memory package) |
|
| 16 | Lower window of driver's door. | ||
| 17 | Install the brake pedal jack with the adapter for brake pedal jack between the brake pedal and the driver's seat. | Protect contact surfaces of Otherwise, the brake pedal and driver's seat may be damaged. |
Fig 1 |
| Fig 2 | |||
| 18 | Determine vehicle level on front and rear axle using electronic inclinometer. | AR40.20-P-0301LW | |
| 19 | Attach quick clamping devices at front and rear wheels and remove tensioning levers. | AR40.20-P-0230SX | |
| 20 | Attach wheel mirrors or measurement pickups. | ||
| 21 | Attach measuring heads. | ||
| Measure | |||
| 22 | Carry out input measurement. | ||
| 23 | Compare determined values with the specified values. | Model 293 | AR40.20-P-0203EQC |
| Model 253 | AR40.20-P-0203LWB | ||
| Model 213 | AR40.20-P-0203LWA | ||
| Model 205 Model 213.064/088/089/264/288/289 Model 253.364/388/389/964/988/989 The camber and caster on the front axle are not adjustable. Model 253 (except 253.388/389/988/989) Model 293 The camber on the rear axle is not adjustable. |
AR40.20-P-0203LWC | ||
| Adjust | |||
| 24 | Adjust camber on rear axle. | According to results of initial measurement. Model 205.386/387/486/487 |
AR40.20-P-0202LWI |
| Model 213.088/089/288/289 | AR40.20-P-0202MNE | ||
| Model 253.388/389/988/989 | AR40.20-P-0202LWX | ||
| 25 | Adjust toe on rear axle. | According to results of initial measurement. | AR40.20-P-0261LW |
| 26 | Adjust camber and caster on front axle. | According to results of initial measurement. Model 205 (except 205.064/086/087/264/286/287/364/386/387/464/486/487) Model 213 (except 213.064/088/089/264/288/289) Model 253 (except 253.364/388/389/964/988/989) Model 293 |
AR40.20-P-0263LW |
| 27 | Adjust toe on front axle. | According to results of initial measurement. | AR40.20-P-0264LW |
| Measure | |||
| 28 | Carry out output measurement. | ||
| Concluding tasks | |||
| 29 | Detach measuring heads. | ||
| 30 | Remove wheel mirrors or measurement pickups. | ||
| 31 | Attach tensioning levers and remove quick clamping devices. | ||
| 32 | Remove brake pedal jack with adapter for brake pedal jack. | ||
| 33 | Lock turn and slip plates. | ||
| 34 | Drive vehicle off measuring system. | ||
| 35 | Switch on easy entry and exit feature. | Model 205, 253, 293 with code 275 (Driver's seat, electrically adjustable with memory function) Model 213 with code 275 (Memory package) |
|
| 36 |
Check headlamp adjustment. | Model 293 | AP82.10-P-8260KA |
| Model 213 | AP82.10-P-8260J | ||
| Model 205, 253 | AP82.10-P-8260E |