LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2016 >> C300 Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheels, Chassis Alignment Check - 205 Chassis (4D Sedan) >> Testing & Repair >> Adjust rear-axle toe - AR40.20-P-0261LW

Adjust rear-axle toe - AR40.20-P-0261LW

MODEL 205 

Fig 1: Identifying Tie Rod, Cam Bolt And Nut
G10133208Courtesy of MERCEDES-BENZ USA
  Adjust     
1 Loosen nut (3)    
2 Adjust toe using cam bolt (2)   *BE40.20-P-1001-10BA 
INSPECT Check     
3 Determine permissible difference in rear axle toe between the right and left side of the vehicle   *BE40.20-P-1002-10BA 
If the specifications are not achieved:
↓
Replace tie rod (1).
AR35.20-P-0109LW
  Adjust     
4 Tighten nut (3) and apply preservation agent to it Cavity preservation, solvent-free (1 l container) *BR00.45-Z-1003-05A 
TORQUE SPECIFICATION Self-locking nut, tie rod to rear axle carrier *BA35.20-P-1002-04M 
CHECK VALUES FOR REAR AXLE TOE

Number Designation MODEL 205.0/2 except 4MATIC, with CODE 485 MODEL 205.0/2/3/4 except 4MATIC, with CODE 677
BE40.20-P-1001-10BA Total toe at vehicle level -0.42° ∠° - -
-0.32° ∠° - -
-0.27° ∠° - -
-0.22° ∠° - 0° 24' (±7')
+0.97° ∠° - -
+1.47° ∠° 0° 23' (±7') -
+1.96° ∠° - -
+2.96° ∠° - -
CHECK VALUES FOR REAR AXLE TOE

Number Designation MODEL 205.0/2/3/4 except 4MATIC, with CODE 486 MODEL 205.0/2 with CODE 482
BE40.20-P-1001-10BA Total toe at vehicle level -0.42° ∠° - -
-0.32° ∠° - -
-0.27° ∠° - -
-0.22° ∠° 0° 24' (±7') -
+0.97° ∠° - -
+1.47° ∠° - -
+1.96° ∠° - -
+2.96° ∠° - 0° 21' (±7')
CHECK VALUES FOR REAR AXLE TOE

Number Designation MODEL 205.0/2/3/4 except 4MATIC, with CODE 489 MODEL 205.0/2, 4MATIC with CODE 485
BE40.20-P-1001-10BA Total toe at vehicle level -0.42° ∠° - -
-0.32° ∠° 0° 24' (±7') -
-0.27° ∠° - -
-0.22° ∠° - -
+0.97° ∠° - -
+1.47° ∠° - -
+1.96° ∠° - 0° 16' (±7')
+2.96° ∠° - -
CHECK VALUES FOR REAR AXLE TOE

Number Designation MODEL 205.0/2/3/4, 4MATIC with CODE 486, left-hand drive vehicle MODEL 205.0/2/3/4, 4MATIC with CODE 486, right-hand drive vehicle
BE40.20-P-1001-10BA Total toe at vehicle level -0.42° ∠° - -
-0.32° ∠° - -
-0.27° ∠° 0° 22' (±7') -
-0.22° ∠° - -
+0.97° ∠° - 0° 20' (±7')
+1.47° ∠° - -
+1.96° ∠° - -
+2.96° ∠° - -
CHECK VALUES FOR REAR AXLE TOE

Number Designation MODEL 205.0/2/3/4, 4MATIC with CODE 489
BE40.20-P-1001-10BA Total toe at vehicle level -0.42° ∠° 0° 24' (±7')
-0.32° ∠° -
-0.27° ∠° -
-0.22° ∠° -
+0.97° ∠° -
+1.47° ∠° -
+1.96° ∠° -
+2.96° ∠° -
CHECK VALUES FOR REAR AXLE TOE

Number Designation MODEL 205.0/2 except 4MATIC, with CODE 485 MODEL 205.0/2/3/4 except 4MATIC, with CODE 677
BE40.20-P-1002-10BA Permissible difference in rear axle toe between right and left side of vehicle ∠° ± 0° 7' ± 0° 7'
CHECK VALUES FOR REAR AXLE TOE

Number Designation MODEL 205.0/2/3/4 except 4MATIC, with CODE 486 MODEL 205.0/2 with CODE 482
BE40.20-P-1002-10BA Permissible difference in rear axle toe between right and left side of vehicle ∠° ± 0° 7' ± 0° 7'
CHECK VALUES FOR REAR AXLE TOE

Number Designation MODEL 205.0/2/3/4 except 4MATIC, with CODE 489 MODEL 205.0/2, 4MATIC with CODE 485
BE40.20-P-1002-10BA Permissible difference in rear axle toe between right and left side of vehicle ∠° ± 0° 7' ± 0° 7'
CHECK VALUES FOR REAR AXLE TOE

Number Designation MODEL 205.0/2/3/4, 4MATIC with CODE 486, left-hand drive vehicle MODEL 205.0/2/3/4, 4MATIC with CODE 486, right-hand drive vehicle
BE40.20-P-1002-10BA Permissible difference in rear axle toe between right and left side of vehicle ∠° ± 0° 7' ± 0° 7'
CHECK VALUES FOR REAR AXLE TOE

Number Designation MODEL 205.0/2/3/4, 4MATIC with CODE 489
BE40.20-P-1002-10BA Permissible difference in rear axle toe between right and left side of vehicle ∠° ± 0° 7'
TIE ROD

Number Designation MODEL 205
BA35.20-P-1002-04M Self-locking nut, tie rod to rear axle carrier Stage 1 Nm 50
Stage 2 ∠° 90
REPAIR MATERIALS

Number Designation Order number
BR00.45-Z-1003-05A Cavity preservation, solvent-free (1 l container) A 000 986 72 70 05
scientia non olet · About LEMON Manuals