Rear axle torsion bar - BA32.20-P-1000-04M
MODEL 251
REAR AXLE TORSION BAR
| Number | Designation | MODEL 251 | ||
|---|---|---|---|---|
| BA32.20-P-1001-04M | Bolt, stabilizer bar retaining clamp to rear axle carrier | Nm | 100 | |
| BA32.20-P-1002-04M | Nut, link rod to spring control arm | Stage 1 | Nm | 100 |
| Loosen stage 2 | ∠° | 180 | ||
| Stage 3 | Nm | 45 | ||
| Stage 4 | ∠° | 90 | ||
| BA32.20-P-1003-04M | Nut, link rod to stabilizer bar | Stage 1 | Nm | 100 |
| Loosen stage 2 | ∠° | 180 | ||
| Stage 3 | Nm | 40 | ||
| Stage 4 | ∠° | 80 | ||