Remove/install center backrest lock in rear passenger compartment - AR91.12-P-1729LW

Model 205.0/1 with code 287 (Folding rear seat backrests)

Model 205.2

Model 205.3

Model 253

Fig 1: Identifying Rear Passenger Compartment Center Backrest Lock Remove/Install Components

Courtesy of MERCEDES-BENZ USA

Shown on MODEL 205.0

Fig 2: Identifying Rear Passenger Compartment Center Backrest Lock Remove/Install Components - Shown On Model 205.0

Courtesy of MERCEDES-BENZ USA

Shown on MODEL 205.0

	Remove/install
1	Release center backrest and fold forward
2	Lock backrest locking (14) using a suitable screwdriver
3	Unlock catch hooks (9), as shown, through the opening using a suitable screwdriver, pull cover (8) a little outwards, and lift out of catch and remove with assembly wedge (16)	Insert the release linkage (10) correctly in the guide (11) of the deflection (12). Otherwise, the backrest lock (14) can no longer be actuated. Position cover (8) uniformly and latch.
3		Mounting wedge	Figure
4	Remove bolts (13)	Bolt, backrest lock to backrest frame	*BA91.12-P-1008-03M
5	Remove backrest lock (14)	Ensure that the pin (15) is located in the notch (arrow B) of the backrest lock (14).
6	Install in the reverse order

REAR SEATS

Number	Designation		Model 205.0	Model 205.1
BA91.12-P-1008-03M	Bolt, backrest lock to backrest frame	Nm	20	20

REAR SEATS

Number	Designation		Model 205.2	Model 205.3
BA91.12-P-1008-03M	Bolt, backrest lock to backrest frame	Nm	20	20

REAR SEATS

Number	Designation		Model 253
BA91.12-P-1008-03M	Bolt, backrest lock to backrest frame	Nm	20

Fig 3: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA