Remove/install rear seat belt buckle - AR91.40-P-1516LW

Model 205.0/1/2 

Model 253 

Fig 1: Identifying Rear Seat Belt Buckle Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Remove seat cushion in the rear	Model 205.0/1/2 with code 248 (Rear seat with integrated child seat) Model 205.0/2 with code P10 (Taxi package Germany)	AR91.12-P-1020LWA
		Model 205.0/1/2 except code 248 (Rear seat with integrated child seat) except code P10 (Taxi package Germany) Model 253	AR91.12-P-1020LW
2.1	Separate electrical connectors (2)	When removing right rear belt buckle (3) and center rear belt buckle (4).
2.2	Disconnect electrical connector (8)	When removing left rear belt buckle (6).
3.1	Remove bolt (1)	When removing right rear belt buckle (3) and center rear belt buckle (4).
		Screw/bolt, rear belt buckle	*BA91.40-P-1009-01U
3.2	Unscrew bolt (7)	When removing left rear belt buckle (6).
		Screw/bolt, rear belt buckle	*BA91.40-P-1009-01U
4.1	Remove right rear belt buckle (3) together with center rear belt buckle (4)	When removing right rear belt buckle (3) and center rear belt buckle (4). Right rear belt buckle (3) and center rear belt buckle (4) form a unit and must be removed or replaced together. Note correct installation position of right rear belt buckle (3) and center rear belt buckle (4).
4.2	Remove left rear belt buckle (6)	When removing left rear belt buckle (6). Note correct installation position of belt end fitting (5) and left rear belt buckle (6).
5	Install in the reverse order

SEAT BELTS/EMERGENCY TENSIONING RETRACTORS

Number	Designation		Model 205.0	Model 205.1
BA91.40-P-1009-01U	Screw/bolt, rear belt buckle	Nm	35	35

SEAT BELTS/EMERGENCY TENSIONING RETRACTORS

Number	Designation		Model 205.2	Model 253
BA91.40-P-1009-01U	Screw/bolt, rear belt buckle	Nm	35	35