Remove and install wiper arm - AR82.30-P-6100NKB
MODEL 117, 156, 176, 242, 246
| Risk of injury due to fan starting unexpectedly | Do not reach into the rotation or hazard area of the fan. Wear closed and close-fitting work clothes. | AS20.40-Z-0001-01A | |
| Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism. | Always remove ignition key when working on windshield wiper mechanism. | AS82.30-Z-0001-01A | |
| Remove/install | |||
| 1 | Bring wiper system into park position | ||
| 2 | Switch off ignition and remove transmitter key | ||
| 3 | Open engine hood | ||
| 4 | Remove covers (3) | ||
| 5 | Unscrew nuts (4) | *BA82.30-P-1002-01O | |
| 6 | Release and remove wiper arm (1 or 2) with puller and thrust piece from wiper system | ||
| Fig 2 | |||
| Fig 3 | |||
| 7 | Install in the reverse order |
WINDSHIELD WIPER
| Number | Designation | MODEL 117 | MODEL 156 | |
|---|---|---|---|---|
| BA82.30-P-1002-01O | Nut for wiper arm to wiper system | Nm | 30 | 30 |
WINDSHIELD WIPER
| Number | Designation | MODEL 176 | MODEL 242 | |
|---|---|---|---|---|
| BA82.30-P-1002-01O | Nut for wiper arm to wiper system | Nm | 30 | 30 |
WINDSHIELD WIPER
| Number | Designation | MODEL 246 | |
|---|---|---|---|
| BA82.30-P-1002-01O | Nut for wiper arm to wiper system | Nm | 30 |