Remove/install paneling in footwell - AR68.30-P-4010NKB
MODEL 117
MODEL 176
MODEL 242
MODEL 246
Passenger footwell, shown on MODEL 246
Fig 1: Identifying Footwell Paneling Remove/Install Components - Shown On Passenger Footwell (1 Of 2)
Fig 2: Identifying Footwell Paneling Remove/Install Components - Shown On Passenger Footwell (2 Of 2)
Driver footwell, shown on MODEL 246
Driver footwell, shown on MODEL 246 with CODE U62 (Light and visibility package)
| Risk of injury during testing and repair operations related to pyrotechnical components | Do not expose pyrotechnical components to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such components. | AS91.00-Z-0008-01A | |
| Information, assessment and legal requirements when working with, handling and storing pyrotechnical components | AH91.00-Z-0000-10A | ||
| Remove, install driver-side footwell paneling (2) | |||
| 1 | Move driver seat towards the rear | ||
| 2 | Disconnect ground line of battery | MODEL 117, 176, 242, 246 with CODE 294 (Kneebag) |
|
| AR54.10-P-0003NKB | |||
| 3 | Unscrew bolts (7) and remove driver side footwell paneling (2) | Secure driver kneebag against falling down. |
|
with CODE 294 (Kneebag) |
*BA91.60-P-1009-01F | ||
| 4 | Unlock electrical connector from diagnostic connector (X11/4) and disconnect | ||
| 5 | Unclip cable tie (9) | MODEL 117, 176, 242, 246 with CODE U62 (Exterior light and sight package) |
|
| Figure | |||
| 6 | Disconnect electrical connector (10) | MODEL 117, 176, 242, 246 with CODE U62 (Exterior light and sight package) |
|
| 7 | Release catch hook (11) and unclip release (12) from driver-side footwell paneling (2) | ||
| 8 | Remove driver side footwell paneling (2) from vehicle | ||
| 9 | Remove diagnostic connector (X11/4) from driver side footwell paneling (2) | When replacing driver side footwell paneling (2). | |
| 10 | Remove left front footwell lamp from driver side footwell paneling (2) | MODEL 117, 176, 242, 246 with CODE U62 (Exterior light and sight package) When replacing driver side footwell paneling (2). |
|
| 11 | Install in the reverse order | ||
| Remove, install passenger side footwell paneling (1) | |||
| 12 | Move front passenger seat towards the rear | ||
| 13 | Remove retaining clips (3) from passenger side footwell paneling (1) | Figure | |
| 14 | Push passenger side footwell paneling (1) toward front out of brackets (4) | ||
| 15 | Disconnect electrical connector (5) and remove passenger side footwell paneling (1) | MODEL 117, 176, 242, 246 with CODE U62 (Exterior light and sight package) |
|
| 16 | Remove right front footwell lamp (E17/15) | MODEL 117, 176, 242, 246 with CODE U62 (Exterior light and sight package) When replacing passenger side footwell paneling (1). |
|
| 17 | Install in the reverse order |
AIRBAG
| Number | Designation | MODEL 117 | MODEL 176, 242, 246 | |
|---|---|---|---|---|
| BA91.60-P-1009-01F | Bolt, knee airbag to bracket | Nm | 5 | 5 |