Retrofit COMAND APS - AN82.85-P-0006NKB

MODEL 117.3## 1#, 176.0## 1# with CODE 510 (Audio 20 CD with 6-disc CD changer) without CODE 494 (US version) without CODE 498 (Japanese version) without CODE 516 (Audio 5 USB) without CODE 830 (Vehicles for China, additional parts) 

MODEL 117.3## 1#, 176.0## 1# with CODE 523 (Audio 20 CD) without CODE 494 (US version) without CODE 498 (Japanese version) without CODE 516 (Audio 5 USB) without CODE 830 (Vehicles for China, additional parts) 

MODEL 156.9 with CODE 510 (Audio 20 CD with 6-disc CD changer) without CODE 494 (US version) without CODE 498 (Japanese version) without CODE 830 (Vehicles for China, additional parts) 

MODEL 156.9 with CODE 523 (Audio 20 CD) without CODE 494 (US version) without CODE 498 (Japanese version) without CODE 830 (Vehicles for China, additional parts) 

MODEL 242.8## 1#, 246.2## 1# with CODE 510 (Audio 20 CD with 6-disc CD changer) without CODE 494 (US version) without CODE 498 (Japanese version) without CODE 516 (Audio 5 USB) without CODE 830 (Vehicles for China, additional parts) 

MODEL 242.8## 1#, 246.2## 1# with CODE 523 (Audio 20 CD) without CODE 494 (US version) without CODE 498 (Japanese version) without CODE 516 (Audio 5 USB) without CODE 830 (Vehicles for China, additional parts) 

Shown on MODEL 246 

Fig 1: Identifying Comand Components - Shown On Model 246

Courtesy of MERCEDES-BENZ USA

Vehicles with CODE 508 (Navigation module preinstallation) or CODE 509 (Navigation module) 

Fig 2: Identifying Comand APS - With Code 508

Courtesy of MERCEDES-BENZ USA

	Remove
1	Move front passenger seat toward rear
2	Remove radio
			AR82.60-P-7502NKB
		The removed radio is no longer required.
3	Remove 14.7 cm Audio/COMAND display (A40/8)
			AR82.60-P-7722NKB
		The 14.7 cm Audio/COMAND display (A40/8) is no longer required.
4	Remove instrument cluster	Vehicles except CODE 508 (Navigation box preinstallation) and except CODE 509 (Navigation box)
			AR54.30-P-6015NKB
5	Remove glove compartment
		MODEL 117, 156, 176	AR68.10-P-1400NKA
		MODEL 242, 246	AR68.10-P-1400NKB
6	Remove bracket for navigation module (A2/30-1) and remove navigation module from glove compartment	Vehicles with CODE 508 (Navigation box preinstallation) or with CODE 509 (Navigation box) The cradle for the navigation module (A2/30-1) and the navigation module are no longer required, they are to be handed over to the customer.
	Install
7.1	Route the Global Positioning System (GPS) antenna line, which was connected to the navigation module bracket (A2/30-1) at the antenna lines slot (C) (arrow), into the COMAND controller unit (A40/3) recess	Vehicles with CODE 508 (Navigation box preinstallation) or with CODE 509 (Navigation box) The 2-pin connector of the antenna lines must be disassembled and the Traffic Message Channel (TMC) antenna line must be strapped down together with the other wiring harnesses of the bracket for navigation module (A2/30-1). The openings in the glove compartment must be closed off.
7.2	Retrofit GPS antenna	Vehicles except CODE 508 (Navigation box preinstallation) and except CODE 509 (Navigation box)
		MODEL 156.9	AN82.61-P-7474-04NKX
		Model 117.3	AN82.61-P-7474-04NKC
		MODEL 242.8, 246.2	AN82.61-P-7474-04NKB
		MODEL 176	AN82.61-P-7474-04NKA
8	Retrofit COMAND fan motor (M4/13)		AN82.85-P-0005-01NKB
9	Retrofit electrical wiring harness for COMAND fan motor (2)		AN82.85-P-0005-02NKB
10	Install 17.8 cm Audio/COMAND display (A40/8)
			AR82.60-P-7722NKB
11	Install instrument cluster	Vehicles except CODE 508 (Navigation box preinstallation) and except CODE 509 (Navigation box)
			AR54.30-P-6015NKB
12	Install COMAND controller unit (A40/3)
			AR82.60-P-7502NKB
		Vehicles with CODE 508 (Navigation box preinstallation) or with CODE 509 (Navigation box) The GPS antenna line, which was connected to the navigation module bracket (A2/30-1) (arrow), is connected to the COMAND controller unit (A40/3). Vehicles except CODE 508 (Navigation box preinstallation) and except CODE 509 (Navigation box) The white 1-pin connector of the retrofitted GPS antenna must be connected to the COMAND controller unit (A40/3).
13	Install remaining parts
	Update Vehicle Documentation (VeDoc)
14	Delete special equipment in on-line vehicle data card	Vehicles with CODE 510 (Audio 20 with CD changer) Code 510 (Audio 20 with CD changer)
15	Delete special equipment in on-line vehicle data card	Vehicles with CODE 523 (MB Audio 20 radio) CODE 523 (MB Audio 20 radio)
16	Delete special equipment in on-line vehicle data card	Vehicles with CODE 508 (Navigation box preinstallation) CODE 508 (Navigation module preinstallation)
17	Delete special equipment in on-line vehicle data card	Vehicles with CODE 509 (Navigation box) Code 509 (Navigation module)
18	Enter special equipment in on-line vehicle data card	CODE 527 (COMAND APS with single DVD drive (with navigation))
19	Attach "COMAND APS retrofitted in accordance with AN82.85-P-0006NKB " note under field organization texts to design group 82
20	Connect diagnostic system and select vehicle via the vehicle identification number (VIN)
			AD00.00-P-2000-04A
21	Carry out variant coding using software calibration number (SCN)	"Instrument cluster"
22	Carry out variant coding using software calibration number (SCN)	Vehicles with CODE 218 (reversing camera) "Reversing camera"
23	Disconnect diagnostic system
			AD00.00-P-2000-04A
	Check
24	Perform function test	See operator's manual for COMAND controller unit (A40/3).