Remove/install front seat backrest seat-back lining - AR91.10-P-1910NKB

MODEL 117, 156, 176, 242, 246 

Shown on removed seat on MODEL 246 with CODE 30P (stowage box/tray package) 

Fig 1: Identifying Front Seat Backrest Seat-Back Lining Remove/Install Components - Shown On Model 246

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Adjust front seat forward and set backrest to upright position
2	Remove folding table (2) from front seat	MODEL 242, 246 with CODE 30P (Stowage Space package)
			AR91.10-P-1930NKB
3	Loosen edge stripping on outsides (arrows a) of backrest cover (3) until screws/bolts (4) are accessible	Extraction hook	Fig 2
4	Remove screws/bolts (4) of seat-back lining (1)
5	Pull seat-back lining (1) back at bottom on both sides (arrows b) until seat-back lining (1) can be removed toward bottom	When pulling out the seat-back lining (1), observe the guide (7). Otherwise the guide (7) may be damaged.
6	Remove seat-back lining (1) downwards	Ensure shackles (5), catch hooks (6) and guide (7) are correctly seated in backrest frame.
7	Install in the reverse order

Fig 2: Identifying Extraction Hook (140 589 02 33 00)

Courtesy of MERCEDES-BENZ USA