Convert Drive Kit Plus for iPhone 4 to Drive Kit Plus for iPhone 5 - AZ82.60-P-0026NKA
MODEL 117, 156, 176, 246 with CODE B56 (Drive Kit Plus for the iPhone® 4/4S)
Routing diagram, Drive Kit Plus for the Apple iPhone® 5, shown on left-hand drive vehicle
Installation location of Bluetooth module (4) and ADAP adapter for HDMI on Drive Kit Plus for Apple iPhone® 5, shown on left-hand drive vehicle
Installation location of Drive Kit Plus control unit and Drive Kit Plus cradle for Apple iPhone® 5, shown on left-hand drive vehicle
Fig 3: Identifying Drive Kit Plus Control Unit And Apple iPhone® 5 Drive Kit Plus Cradle Installation Location
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove | |||
| 1 | Switch off ignition and remove transmitter key from electronic ignition lock control unit | ||
| 2 | Fold armrest up | ||
| 3 | Unclip cover from rear center console and place to one side electrical connections connected | ||
| AR68.20-P-2350NKB | |||
| Fig 4 | |||
| 4 | Remove Drive Kit Plus cradle for Apple iPhone® 4 | AZ82.60-P-0026-03NKA | |
| 5 | Release right front seat and slide forward with lines connected | ||
| MODEL 246 with CODE B56 (Drive Kit Plus for the iPhone® 4/4S) |
AR91.10-P-1000NKB | ||
| MODEL 117, 156, 176 with CODE B56 (Drive Kit Plus for the iPhone® 4/4S) |
AR91.10-P-1000NKA | ||
| 6 | Remove air duct under right front seat | ||
| 7 | Raise carpet at right rear far enough to gain access to the nuts for the Drive Kit Plus control unit (1) | ||
| 8 | Unscrew nuts of Drive Kit Plus control unit (1) | ||
| 9 | Detach center console at rear and in center | ||
| AR68.20-P-2000NKB | |||
| Install | |||
| 10 | Retrofit Drive Kit Plus Bluetooth module (4) for the Apple iPhone® 5 | AZ82.60-P-0026-04NKA | |
| 11 | Retrofit Drive Kit Plus wiring harness (5) for Apple iPhone® 5 | AZ82.60-P-0026-01NKA | |
| 12 | Retrofit Drive Kit Plus cradle (2) for Apple iPhone® 5 | AZ82.60-P-0026-03NKA | |
| 13 | Install software onto USB stick and flash through update adapter for iPhone® 5 onto Drive Kit Plus control unit (1) | Services & Downloads > Additional Information > Telematics Accessories. |
|
| 14 | Install remaining parts | ||
| Update vehicle documentation (VeDoc) | |||
| 15 | Delete code B56 (Drive Kit Plus for Apple iPhone® 4) and enter CODE B62 (Drive Kit Plus for Apple iPhone® 5) through VeDoc in vehicle data card online | ||
| 16 | Attach note "Drive Kit Plus for Apple iPhone® 5 retrofitted as per AZ82.60-P-0026NKA " under field organization texts to DG 82 | ||
| 17 | Connect diagnostic system and select vehicle via the vehicle identification number (VIN) | ||
| AD00.00-P-2000-04A | |||
| 18 | Perform variant coding of "instrument cluster", "SAM control unit" and "central gateway in the electronic ignition lock control unit" with XENTRY using Software Calibration Number (SCN) | ||
| 19 | Disconnect diagnostic system | ||
| AD00.00-P-2000-04A | |||
| Check | |||
| 20 | Perform function check of Drive Kits Plus for Apple iPhone® 5 |