Remove/Install Moldings - Ar88.80-D-1040H

MODEL 906 

Shown on left cable protective strip (1) with code (LB1) side marker lamps 

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Unscrew bolt (2)	Only on protective strips (1) in front of and behind wheel arch
2	Unclip protective strip (1) with long wedge	Check condition of mounting clips (3), replace if necessary.
		Long wedge	Fig 1
3	Remove lamp socket together with bulb from side marker lamp (E6/7, E6/8, E6/9, E6/10, E6/11, E6/12)	With code (LB1) side marker lamps
4	Remove protective strip (1)
5	Install in the reverse order

Fig 1: Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA