Remove/Install Covering Below Front Grille - Ar88.00-D-2200SD

MODEL 906 without CODE XM0 (Facelift) without CODE ZX8 (Dodge brand scope) without CODE ZX9 (Freightliner (FTL) brand scope) 

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove front grille	MODEL 906	AR88.00-D-2115SD
2	Unscrew bolts (3, 4)
3	Pull covers (2) toward front and unclip	MODEL 906 with CODE F46 (Headlamp cleaning system)
		Mounting wedge	Fig 2
4	Slightly pull cover (1) toward front in direction of arrow, carefully insert detaching tool (5) at side into front-end paneling (7) and unclip cover (1) from front-end paneling (7) on both sides.	Detaching tool	Fig 1
5	Unclip cover (1) from bumper (6) and remove	Mounting wedge	Fig 2
7	Install in the reverse order

Fig 1: Detaching Tool (906 589 05 63 00)

Courtesy of MERCEDES-BENZ USA

Fig 2: Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA