Adjust Installation Depth Of Hinged Door - Ar72.15-D-1021-02B
HINGED DOORS
| Number | Designation | Model 906.1/6/7 | Model 906.2 | |
|---|---|---|---|---|
| BA72.15-N-1013-01C | Bolt, striker bolt to B-pillar | Nm | 20 | 20 |
- Loosen bolts (2).
- Adjust installation depth by horizontally moving lock striker.
Adjust door with a protrusion of 0.2 mm to max. 1 mm. It is necessary to maintain the slight protrusion at the rear, so that the door does not cant on the B-pillar in the event of a crash. Rotary tumbler should engage in the center of the locking eye.
- Tighten bolts (2). Observe specified tightening torque.