Remove/install vacuum pump - AR43.05-P-1320MMI
MODEL 172.4 with ENGINE 152.9
| Remove/install | |||
| 1 | Remove air filter housing (1). | AR09.10-P-1150MMI | |
| 2 | Detach wiring harness (2) from engine suspension lug (3) | ||
| 3 | Unclip engine wiring harness (4) from bracket (5) | ||
| 4 | Unclip vehicle wiring harness (6) from bracket (5) | ||
| 5 | Remove bracket (5) | ||
| 6 | Detach vacuum line (7) from intake manifold and vacuum pump (8) and place to one side | ||
| 7 | Remove bolts (8s) for vacuum pump (8) | ||
| *BA43.05-P-1001-01K | |||
| 8 | Remove vacuum pump (8) upwards | ||
| 9 | Install in the reverse order | ||
| Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. |
AS00.00-Z-0005-01A | |
| 10 | Test run engine and carry out leak check |
VACUUM PUMP
| Number | Designation | Engine 152 | |
|---|---|---|---|
| BA43.05-P-1001-01K | Bolt, vacuum pump to cylinder head/cylinder head cover | Nm | 9 |