Cavity preservation following repair work - AR97.20-P-1500W

MODEL 172

Fig 1: Identifying Cavity Preservation Methods

Courtesy of MERCEDES-BENZ USA

Engine hood

Fig 2: Identifying Engine Hood Repair Work Area

Courtesy of MERCEDES-BENZ USA

Liftgate

Fig 3: Identifying Liftgate Repair Work Area

Courtesy of MERCEDES-BENZ USA

Front fender

Fig 4: Identifying Front Fender Repair Work Area

Courtesy of MERCEDES-BENZ USA

Door

Fig 5: Identifying Door Repair Work Area

Courtesy of MERCEDES-BENZ USA

Front crossmember

Fig 6: Locating Front Crossmember Repair Work Area

Courtesy of MERCEDES-BENZ USA

Front longitudinal member

Fig 7: Locating Front Longitudinal Member Repair Work Area

Courtesy of MERCEDES-BENZ USA

Front longitudinal member, A-pillar, side wall paneling and side longitudinal member

Fig 8: Locating Front Longitudinal Member, A-Pillar, Side Wall Paneling, Side Longitudinal Member Repair Work Area

Courtesy of MERCEDES-BENZ USA

Inner firewall

Fig 9: Locating Inner Firewall Repair Work Area

Courtesy of MERCEDES-BENZ USA

Rear longitudinal member

Fig 10: Locating Rear Longitudinal Member Repair Work Area

Courtesy of MERCEDES-BENZ USA

Rear end

Fig 11: Locating Rear End Repair Work Area

Courtesy of MERCEDES-BENZ USA

Underfloor

Fig 12: Locating Underfloor Repair Work Area

Courtesy of MERCEDES-BENZ USA

Picture item, etc.	Work instructions
	Risk of explosion and poisoning caused by solvent vapors and gasses. Risk of injury to skin and eyes when handling anticorrosion agents.	Never spray anticorrosion agents on flames or glowing hot objects and keep them well away from all potential sources of ignition. Use them only in well-ventilated rooms; wear respiratory protection.	AS97.00-Z-0001-01A
	Notes on cavity preservation		AH97.20-P-0001-01B
	Cavity preservation, solvent-free (1 l container)		*BR00.45-Z-1003-05A
A	Cavity preservation in area of crimp	Apply from inside with hook nozzle Apply cavity preservation with spraying hose and nozzle (spraying angle 360°) as far as possible into cavities.
B	Inner surface, cavities and gaps	Uniformly moisten cavity preservation.

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1003-05A	Cavity sealant, solvent-free (1 l container)	A 000 986 72 70 05