Cavity preservation following repair work - AR97.20-P-1500RK
MODEL 231
The following differentiation is made for cavity preservation:
Engine hood
Front fender
Front door
Front longitudinal member
Rear longitudinal member
Rear end
Upper front longitudinal member, A-pillar, side wall paneling and lower side longitudinal member
Fig 8: Front Longitudinal Member, A-Pillar, Side Wall Paneling And Lower Side Longitudinal Member Cavity Preservation Area
Underfloor
| Picture no., etc. | Work notes | ||
|---|---|---|---|
| Risk of explosion and poisoning caused by solvent vapors and gasses. Risk of injury to skin and eyes when working with anticorrosion agents | Never spray corrosion protection on flames or hot objects and keep well away from all potential sources of ignition. Use only in well-ventilated areas; wear respiratory protection. | AS97.00-Z-0001-01A | |
| Notes on cavity preservation | AH97.20-P-0001-01B | ||
| A | Cavity preservation in crimping area | Cavity preservation, solvent-free (1 l container) |
*BR00.45-Z-1003-05A |
| B | Inner surface, cavities and gaps | Cavity preservation, solvent-free (1 l container) |
*BR00.45-Z-1003-05A |
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1003-05A | Cavity preservation, solvent-free (1 l container) | A 000 986 72 70 05 |