LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2015 >> SL400 >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Electrical System, Equipment & Instruments - 231 Chassis >> Testing & Repair >> Replace Night View Assist camera lens - AR54.30-P-2999LF

Replace Night View Assist camera lens - AR54.30-P-2999LF

MODEL 217, 222, 231 with CODE 610 (Night view assist) 

Shown on model 222 

Fig 1: Spray Nozzle, Cover And Night View Assist Infrared Camera 2 - Shown On Model 222
G11128975Courtesy of MERCEDES-BENZ USA
Fig 2: Removing Sealing Ring Using Suitable Tool
G11128976Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install     
1.1 Remove radiator grille Model 222
with code 610 (Night view assist)
AR88.40-P-4001LF
1.2 Remove Night View Assist infrared camera 2 (B84/11) Model 231
with code 610 (Night view assist)
INSTALLATION IMPORTANT The camera lens (8) must be installed parallel to the front of the vehicle.
AR54.30-P-3008LF 
1.3 Remove front bumper Model 217
with code 610 (Night view assist)
AR88.20-P-2000LC
2 Remove cover (9) Model 222
with code 610 (Night view assist)
 
3 Unclip spray nozzle (1) and place to one side Model 217, 222
with code 610 (Night view assist)
 
REFER TO SELF-DIAGNOSTIC SYSTEMS   INSTALLATION IMPORTANT Check the spray pattern of the spray nozzle (1) using the diagnostic system. AD00.00-P-2000-04B
4 Clean surface around Night View Assist infrared camera 2 (B84/11)    
5 Unlock retaining lug (2), turn retaining ring (3) counterclockwise and remove INSTALLATION IMPORTANT Replace retaining ring (3).
Repair kit for Night View camera IR
*BR00.45-Z-1019-08A 
6 Pry out camera glass (4) at the groove (5) carefully NOTES Wear gloves.
Otherwise the Night View Assist infrared camera 2 (B84/11) can get damaged due to particles of dust or grease.
INSTALLATION IMPORTANT Pay attention to the direction of installation of the camera glass (4). The protective foil must face toward the outside. Remove the protective foil.
INSTALLATION IMPORTANT Replace the camera glass (4); install making sure that it is free of dust and grease.
Repair kit for Night View camera IR
*BR00.45-Z-1019-08A 
7 Remove sealing ring (6) using a suitable tool (e.g. tweezers) NOTES Do not touch the conductor tracks (7) or the camera lens (8).
The Night View Assist infrared camera 2 (B84/11) can get damaged otherwise.
INSTALLATION IMPORTANT Replace sealing ring (6). Repair kit for Night View camera IR
*BR00.45-Z-1019-08A 
1 CLEAN Clean     
8 Clean contact surface of sealing ring (6) IMPORTANT With cleaning swabs provided.
Repair kit for Night View camera IR
*BR00.45-Z-1019-08A 
    Windshield washer fluid *BR00.45-Z-1077-04A 
9 Install in the reverse order    
REPAIR MATERIALS

Number Designation Order number
BR00.45-Z-1019-08A Repair kit for Night View camera IR A 222 905 81 04
BR00.45-Z-1077-04A Windshield washer fluid A 001 986 75 71