Remove/install armrest lid on center console - AR68.20-P-2370LF

MODEL 217, 222 

Shown on model 222 

Fig 1: Armrest Lid On Center Console Remove/Install Components - Shown On Model 222 (1 Of 2)

Courtesy of MERCEDES-BENZ USA

Fig 2: Armrest Lid On Center Console Remove/Install Components - Shown On Model 222 (2 Of 2)

Courtesy of MERCEDES-BENZ USA

Shown on model 217.4 

Fig 3: Armrest Lid On Center Console Remove/Install Components - Shown On Model 217.4

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove upper part of center section		AR68.20-P-2012LF
2	Remove retaining clip (4)
3	Disconnect electrical connector (5) from optical fiber (6)	Hold optical fiber (6) with thumb. Otherwise the optical fiber (6) can be damaged.
4	Remove bolt (3)
5	Disconnect electrical connectors (8)	Model 217, 222 with code 889 (KEYLESS-GO)
6	Disconnect electrical connectors (9)	Model 217, 222 with code 906 (Front armrest heater)
7	Open armrest cover (1)
8	Unlock retaining clips (7)
9	Remove armrest cover (1) from center console top section (2)
10	Install in the reverse order